Single Zone/Multi-Zone Slim Duct Combinations 12,000btu

Eco-Air
SKU:
MTIU-12HWFN1-M
Current Stock:

Ducted indoor units are ideal indoor comfort options for homes and businesses with silent, energy-saving operation along with flexible installation and air flow. With models ranging in capacity from 12,000 to 36,000 BTU/h and adjustable air volume controls, ducted units bring out the best of a ductless system with an elegant, concealed design. Ducted indoor unit can be mixed and matched with other multi-zone indoor units for zone control of multiple rooms/areas.

Features

  • Slim Duct Unit
    • When it’s cold outside it’s warm inside. Eco-Air Slim Duct indoor units can be used as a primary heat source. When coupled with a Hyper Heat outdoor unit, Heat Pump operation is possible down to -30°C. The Slim Duct units are factory ready for a third-party auxiliary electric heat module if needed.
  • Built-in Drain Pump
    • The Slim Duct unit is equipped with a factory-installed condensate lift pump capable of lifting the water up to 29″ to a gravity drain pipe.
  • Fresh Air Intake
    • The air handler can mix fresh air from the outside with room existing air to achieve optimal indoor air quality (IAQ).
  • Auto Defrost
    • This feature prevents the indoor coil from freezing and maintains dehumidification even in low-temperature conditions.
  • Auto Restart Function
    • If the air conditioner shuts off unexpectedly due to a power outage, it will restart with the previous settings when the power resumes.
  • Refrigerant Leak Detection
    • In the unlikely event of a refrigerant leak, the indoor unit’s wall controller will display an “EC” error code and automatically stop the system from operating. This protects the compressor from high-temperature damage due to a low refrigerant condition.
  • Compatibility
    • Eco-Air Slim Duct units are compatible with select Single Zone and all Multi-Zone outdoor units including Hyper Heat models.
  • Outdoor Units
    • Available in Standard Inverter & Hyper Heat Models
  • Compressor Heating Belt
    • A compressor Heating Belt is standard for easier start-ups and compressor protection during cold weather.
  • Base Pan Heater
    • Base Pan Heater is standard to ensure no ice build-up inside the outdoor unit and proper drainage occurs during cold weather and when the defrost cycle is initiated.
  • Low Ambient Cooling
    • Eco-Air units can provide cooling at low outdoor temperatures. This is especially useful when year-round cooling is required. 

Downloads